Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 74)

74 Publication IASIMP-QS011B-EN-P — January 2009
Chapter 6 Motion FactoryTalk View Integration
6. Edit parameters 2 and 3.
In this example:
#2 = AXIS_02
becomes
#2 = AXIS_03
#3 = SelectedAxis2
becomes
#3 = SelectedAxis3
7. Choose File>Save.
8. Repeat step 2…step 7 as necessary for your axis count.
9. The pre-configured application files include HMI tags for up to four axes.
Add an HMI Tag
In this section, you create an HMI string tag for each parameter file (for Axis 5 or greater) created
in Add the Parameter File.
Follow these steps to add an HMI tag to your FactoryTalk View ME application.
1. Expand your application file in the Explorer
window.
2. Double-click Tags.
The Tags editor window opens.
If your axis count is Then go to
Four or less Edit Display Files on page 75
Five or more Add an HMI Tag on page 74