Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 111)

Publication IASIMP-QS011B-EN-P — January 2009 111
PhaseManager for S-88 Users Appendix B
Reschedule Programs in T00_Main
1. Right-click on T00_Main and select Properties.
2. Click the Program/Phase Schedule tab.
3. In the Scheduled list, select an item that is out of order and use the Move selector buttons
until the list looks like the one in the ‘After’ list in step 5 below.
4. Click OK.
5. Verify your program scheduling as shown below.
Your application logic now uses PhaseManager and the S-88 state model. Continue on with the
steps below to change your operator interface screens.
Before After