Rockwell Automation SP500 AC Drive Installation and Operation Manual - Manual (Page 102)

B-2 SP500 AC Drive Installation and Operation Manual Version 3.1
Parameter
No. Parameter Name Range Step Size
Default
Setting
Setting Date
F-26 Auto-Restart Number of Attempts 0 - 10
0 = disabled
N/A 0
F-27 Auto-Restart Retry Wait Time
(seconds) 1 - 30 1.0 1
F-28 Drive Voltage Selection This parameter is set at the factory. Do not change the
setting.
F-29 Analog Output Select SPd
LOAd
UOL
rEF
N/A SPd
F-49 Version Information x.xx N/A Read
Only