Rockwell Automation SP500 AC Drive Installation and Operation Manual - Manual (Page 76)

8-4 SP500 AC Drive Installation and Operation Manual Version 3.1
Important: There is no visual indication of the status of this feature. You must access
F-20 to verify its current value (ON or OFF).
Step 3. Press the key until the password number, 257, is displayed. (Holding
down the key increases the scroll speed.)
Step 4. Press the MODE/ENTER key to save the password number.
ON or OFF is displayed to indicate the
current state of the password lockout.
Step 5. Press the MODE/ENTER key to exit the parameter.
The parameter number is displayed again.
Mode
Enter
START
Forward
Reverse
STOP
RESET
RPM
%Load
Volts
Remote
RUN
Program
Forward
Reverse
Mode
Enter
START
Forward
Reverse
STOP
RESET
RPM
%Load
Volts
Remote
RUN
Program
Forward
Reverse
Mode
Enter
START
Forward
Reverse
STOP
RESET
RPM
%Load
Volts
Remote
RUN
Program
Forward
Reverse