Mount and wire the 1794-ps3 power supply, Mount and wire the, 1794-ps3 power – Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start User Manual
Page 18: Supply, Upper-lip of din rail latch, Gr l2/n l1
Advertising
18
Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 1
Prepare the Distributed POINT I/O Hardware
Mount and Wire the 1794-PS3 Power Supply
Use a 1794 FLEX I/O power supply to power the distributed POINT I/O modules. This
publication uses the 1794-PS3 power supply.
1794-PS3 Power Supply
1.
Hook the upper-lip of the DIN rail
latch onto the DIN rail.
2.
Press the module onto the DIN rail.
3.
Connect the 120/230V AC power,
120/230V AC common, and AC
Ground wires.
WARNING:
Verify that all incoming power is turned off before wiring power.
Upper-lip of DIN
rail latch.
r
e
w
o
P
C
D
V
4
2
Y
L
P
P
U
S
R
E
W
O
P
3
S
P
-
4
9
7
1
V
4
2
M
O
C
GR
L2/N
L1
Advertising