Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 36)

36 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Create DeviceNet Network Software Files
Configure the DeviceNet Subnet
1. From the File pull-down menu,
choose New.
2. Click Who Active to go online.
3. Expand the appropriate network
and select the DeviceNet Subnet,
DeviceNet network.
4. Click OK.
5. Click OK to upload device
information.