Additional resources, Common power – Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start User Manual
Page 19
Advertising
Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
19
Prepare the Distributed POINT I/O Hardware Chapter 1
Wire the 1734-ADN DeviceNet Adapter to the Power Supply
1.
Connect the 12/24V DC common
and 12/24V DC power wires from
the power supply to the adapter.
2.
Turn on incoming power.
Additional Resources
For a list of additional resources that
might assist you when preparing the
distributed POINT I/O module
hardware, see
24VDC
Source
Output
Module
Status
Network
Status
1734
OB4E
NODE:
0
1
2
3
Adapter
Status
System
Power
DeviceNet
Status
PointBus
Status
Field
Power
1734-ADN
Common
Power
Advertising