Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 37)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 37
Create DeviceNet Network Software Files Chapter 3
The modules on the subnet
appear.
6. From the Network pull-down
menu, choose Upload from
Network.
7. When prompted to upload entire
network, click Yes.
8. Right-click the 1734-ADN
adapter and choose Properties.
The remaining steps will associate
a main and subnet .dnt project for
the 1734-ADN module so you can
easily switch between the two
projects in RSNetWorx for
DeviceNet software.
You also need the main and subnet
.dnt projects to use the DeviceNet
Tag Generator utility.