Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 28)

28 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Create DeviceNet Network Software Files
4. Click Browse.
When the Device Selection dialog
box appears, you can browse to the
1769-SDN scanner module over
an EtherNet/IP network or USB
connection. This example uses an
EtherNet/IP network connection.
5. Under the AB_ETHIP-1 driver,
expand the path to the 1769-SDN
scanner module as shown in the
example graphic.
6. Click OK.
7. If you receive a linking device
warning, click Yes.
The Node Commissioning dialog
box is populated with the
1769-SDN module’s current
settings.