Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 53)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 53
Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project Chapter 3
Add Ladder Logic
1. In RSLogix 5000 software’s
controller organizer, expand Tasks
>MainTask>MainProgram.
2. Double-click MainRoutine.
A blank routine opens.
3. Add a new rung to the routine.
4. From the Element Toolbar, drag
and drop an Examine On element
and an Output Energize element
onto the rung.
5. Double-click the ? in the Examine
On element.
6. Type PB for push button.
7. Press Enter.