Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 48)

48 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project
• These tasks described in Chapter 1, Prepare the Distributed POINT I/O Hardware on
page 13 :
– Mount and Connect the 1734-ADN DeviceNet Adapter
– Mount the 1734-OB4E Digital Output Module
– Mount and Wire the 1794-PS3 Power Supply
– Wire the 1734-ADN DeviceNet Adapter to the Power Supply
• These tasks described in Chapter 2 , Create DeviceNet Network Software Files on page 21 :
– Set the 1769-SDN Scanner Module’s Node Address
– Create a DeviceNet Configuration File
– Edit the DeviceNet Adapter Parameters
– Configure the DeviceNet Subnet
– Create a DeviceNet Scanlist
What You Need
You need the following software to complete the tasks in this chapter:
• RSLogix 5000 software
• DeviceNet Tag Generator tool in RSLogix 5000 software