Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 55)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 55
Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project Chapter 3
13. From the Type pull-down menu,
choose Alias.
14. From the Alias For pull-down
menu, browse to the 1734-OB4E
digital output module and choose
the bit for the light you want to
turn on.
This example uses
Local_DeviceNet_scanner_N02_S
01_COS_O.Data_0.
15. Click Create and Close.
This graphic shows the rung with each
element configured.