Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 39)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 39
Create DeviceNet Network Software Files Chapter 3
12. Save the DeviceNet subnet
configuration file.
Name the file so it can be easily
identified as the subnet. This
quick start uses the name
SubnetDeviceNet.dnt.
13. Record the file name.
14. From the File menu, choose Open.
15. Select the main DeviceNet file and
click Open.