Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 41)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 41
Create DeviceNet Network Software Files Chapter 3
19. When the updated 1734-ADN
Point I/O DeviceNet Adapter
dialog box appears, click OK.
20. Click OK.
21. Save your main DeviceNet
configuration file.
Create a DeviceNet Scanlist
1. Verify that the network is online.
2. If the network is not online,
choose Online from the Network
pull-down menu.
3. When alerted to uploading or
downloading device information,
click OK.
4. From the Network pull-down
menu, choose Upload from
Network.