Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 57)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 57
Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project Chapter 3
Test the 1734-OB4E Digital Output Module’s Tags
1. Move the controller’s mode switch
to the RUN position.
2. In the configuration tree, double-
click Controller Tags.
3. Change the
O.CommandRegister.Run tag to 1.
The 1769-SDN scanner module
transitions to Run mode.
RUN
REM
PROG