Create devicenet tags, Create devicenet, Tags – Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start User Manual
Page 50
Advertising
50
Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project
Create DeviceNet Tags
1.
Launch the DeviceNet Tag Generator.
2.
Select your RSLogix 5000 project
and click Select Scanner.
3.
Select the 1769-SDN scanner
module that scans the network
where the device is located and
click Select RSNetWorx Project.
IMPORTANT
Before running the DeviceNet Tag Generator, verify the following:
•
RSLogix 5000 software is running and the project is open.
•
RSNetWorx for DeviceNet software is closed.
Advertising