Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 56)

56 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project
Download the Project
1. Save your changes.
2. Move the controller’s mode switch
to the PROG position.
3. Click the Controller Status icon
and choose Download.
4. In the Who Active dialog box,
choose your controller and click
Download.
5. Click Download one more time.
RUN
REM
PROG