Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 44)

44 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Create DeviceNet Network Software Files
13. Select the 1734-ADN adapter and
move it to the Scanlist.
14. Click Edit I/O Parameters.
15. Verify that the I/O parameters
match
step 7 on page 42 ; if not,
update them.
16. Click OK.
17. Verify that Automap on Add is
checked and click Apply.