Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 35)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 35
Create DeviceNet Network Software Files Chapter 3
4. Change the following parameters:
• AutoAddress Backplane
Modules= 1
• Auto Start Mode = Map Data to
DWord Boundaries.
5. Click Apply.
6. When prompted to update the
adapter’s configuration, click Yes.
7. Click OK.
8. Save the DeviceNet configuration file.