Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 22)

22 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Create DeviceNet Network Software Files
Before You Begin
Before you begin, you must complete these tasks:
• These tasks described in Before Using This Publication on page 5 :
– Prepare the Logix5000 control system hardware
– Prepare the computer
– Configure the network
– Create an RSLogix 5000 project
• These tasks described in Chapter 1, Prepare the Distributed POINT I/O Hardware on
page 13 :
– Mount and Connect the 1734-ADN DeviceNet Adapter
– Mount the 1734-OB4E Digital Output Module
– Mount and Wire the 1794-PS3 Power Supply
– Wire the 1734-ADN DeviceNet Adapter to the Power Supply
What You Need
You need RSNetWorx for DeviceNet software to complete the tasks in this chapter.