Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 52)

52 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project
7. When prompted to continue,
click Yes.
When tag generation is complete,
the text log appears.
8. Close the DeviceNet Tag
Generator.
The DeviceNet Tag Generator
created new programs and tags that
were added to the controller
organizer in your RSLogix 5000
project.