Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 9)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 9
Preface
Where to Start
Prepare the Distributed
POINT I/O Hardware
Required Tasks
Described in the appropriate Logix5000 controller quick start
1. Prepare the Controller Hardware
2. Prepare the Computer
3. Configure the Network
4. Create RSNetWorx for DeviceNet and RSLogix 5000 Software Projects
page 13
Create DeviceNet
Network Software Files
page 21
Logix5000
Controller
Use the POINT I/O Adapter
and Output Module in
an RSLogix 5000 Project
page 47