Create a devicenet configuration file, Create a, Devicenet – Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start User Manual
Page 30: Configuration file
Advertising
30
Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Create DeviceNet Network Software Files
Create a DeviceNet Configuration File
1.
From the File pull-down menu,
choose New.
2.
Click Who Active to go online.
3.
Expand the networks to the
appropriate DeviceNet network.
In this example, the network is
Port 2, DeviceNet.
Advertising