Rockwell Automation Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start - Manual (Page 54)

54 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012
Chapter 3 Use the POINT I/O Adapter and Output Module in an RSLogix 5000 Project
8. Right-click PB and choose New
“PB”.
9. When the New Tag dialog box
appears, click Create and Close to
use the default values.
10. Double-click the ? in the Output
Energize element.
11. Name the Output Energize
element OB4E_Light.
12. Right-click the OB4E_Light tag
and choose New ‘OB4E_Light’.
IMPORTANT Do not use spaces in the tag name. Use underscores (__) instead.