Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide - Manual (Page 26)

3-6 GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0
Step 2. Use to increase the contrast (make the screen darker) or to decrease
the contrast (make the screen lighter).
Step 3. Press to save the new contrast setting and return to the previous
screen.
3.4 Changing the Language Displayed on the OIM
The OIM can display text in English, German, French, Spanish, or Italian. The default
language is English. You can change the language at any time except when you are in
a parameter entry screen or during self-tuning.
To change the language:
Step 1. Press . The language select screen is displayed, as shown in figure 3.4.
The currently selected option is displayed in the upper right.
Step 2. Press or until the cursor ( ) is pointing to the language you want.
Step 3. Press to accept the new language.
The message “Please Wait” in the new language is displayed for a few seconds.
The display then returns to the previous screen, with the text shown in the new
language.
Figure 3.3 – Contrast Adjustment Screen
Figure 3.4 – Language Selection Screen