Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 123)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
GUIDELINES / 115
MANUAL AB LINES
Manual AB lines can be set manually by entering the coordinates of the A
and B points.
To manually set AB Lines:
1. Select the Guideline menu button and press the Manual AB Line
button.
2. Enter the latitude and longitude coordinates for the A and B points.
3. Press the Check button to accept.
Figure 171
Manual AB Lines
PIVOTS
Once sufficient data is gathered from creating one lap, a circular guideline
displays onscreen. The size of the circles change based on the vehicle’s
distance from the pivot point. The circular guideline is small when the
vehicle is close to the pivot point and large if the vehicle is far from the pivot
point.
Creating a Pivot:
1. Verify a guideline name is created for the pivot.
2. Press the Guideline menu button and select the Pivot button.
3. Press the Create Pivot button. The Create Pivot button begins
flashing and a pivot accuracy bar appears.