Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 131)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
AS APPLIED JOB SETUP / 123
BOUNDARIES
Creating a boundary determines the shape and size of a field. Boundaries
can be saved and loaded again for different applications. A boundary can
be created first as a standalone or drawn at the same time as applying
material.
IMPORTANT: Refer to the Boundary Offset section if the vehicle
cannot drive exactly on the boundary of the field due to
fence lines or other obstacles.
CREATE A STANDALONE BOUNDARY
1. Press the Field menu button.
2. Press the Record Field Boundary button.
3. Begin driving the vehicle along the field boundary. A blue line appears
onscreen behind the vehicle indicating the boundary path.
4. Continue driving around the boundary of the field until the lines are
almost closed.
– Pause Recording button shuts off recording of boundary until the
Record Field Boundary button is pressed to start recording again.
Press the Pause button if an obstacle prevents driving on the
boundary. The icon changes to show the record option. The
boundary records a straight line between the point recording was
paused and the point recording resumed. Press the Record Field
Boundary button to begin recording again. Boundary recording can
be automatically paused if the master switch is turned off.
5. Press the Close Boundary button to close and complete the
boundary.
Figure 179
Drive Boundary of Field
PAUSE BOUNDARY RECORDING WITH MASTER
If the master switch is turned off while a boundary is recorded, the
boundary recording is paused. Turning the master switch back on resumes
the boundary recording. This may be useful to automatically pause
boundary recording if product application is paused to maneuver in a tight
corner or deviate around an object.