Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 35)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
TERMINAL SETUP / 27
ALARM AUDIO
4. An audible alarm can be enabled or disabled when an alarm event
occurs. Press the Alarm Audio button to display menu selections.
Press the Check button to accept.
– Enabled triggers an audible alarm with an alarm screen
– Disabled has no audible alarm; only an alarm screen
Figure 36
Alarm Audio
TOUCHSCREEN CALIBRATION
Recalibrate Touchscreen button re-calibrates the display when screen
responsiveness does not occur effectively to a finger touch. Follow
onscreen instructions to perform a calibration.
1. At the Environment setup screen, press the Recalibrate Touchscreen
button. A system reboot is required after a calibration is complete.
Press the Check button to proceed.
Figure 37
Recalibrate Touchscreen
2. Hash marks are located in various screen positions. Follow and finger
press the red marker points moving to each mark.
3. Press the Commit Calibration button to restart terminal and accept
calibration. The system may proceed to the Touchscreen Sensitivity
screen.