Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 49)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
TERMINAL SETUP / 41
8. Select Yes to turn off.
9. Leave the USB in the console and restart by pressing and holding the
green power button.
– The installation procedure starts automatically and could take
several minutes to complete.
10. After the installation is complete, the console displays the message
‘Please remove the USB flash drive’.
11. Remove the USB flash drive and the console restarts automatically.
12. After the restart, the console displays the touch screen calibration
screen.
– Touch the displayed cross marks in turn and then press Confirm or
select no within 10 seconds to skip this step. This is only done the
first time after installation.
13. The console provides the option to restore all user data to the state it
was before the upgrade. Select Yes to restore saved data to the
console.
IMPORTANT: Selecting No will delete all data saved on the console.
The console will restart automatically.
14. The console restarts automatically and is ready for use.