Operator’s manual, Harness connections – Great Plains DICKEY-john AI-120 12-inch Virtual Terminal User Manual
Page 15
Advertising
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
INSTALLATION / 7
HARNESS CONNECTIONS
The AI-120 terminal connects to the tractor cab harness via an adapter
harness. A GPS receiver is required to provide implement position via CAN
or RS232 communication. A row control switch module/clutch folding switch
module provides quick access of turning sections on and off when manual
override is required. Ignition wire connects to switched power source.
A DICKEY-john shutoff output module WSMB and harness are required for
interfacing with shutoff modules (Tru Count solenoid modules are not
supplied by DICKEY-john). Harnessing structure illustrated below.
Figure 3
AI-120 Harnessing
Advertising