Operator’s manual – Great Plains DICKEY-john AI-120 12-inch Virtual Terminal User Manual
Page 36
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
28 / TERMINAL SETUP
Figure 38
Touchscreen Calibration
TOUCH SCREEN SENSITIVITY
Touchscreen sensitivity adjusts how the screen responds to a button press.
A system reboot is required after calibration is complete.
1. At the Environment setup screen, press the Touchscreen Sensitivity
button. A system reboot is required after calibration is complete. Press
the Check button to proceed.
Figure 39
Touch Screen Sensitivity
2. At the Calibration screen, select either the Low, Medium, or High
button to test the selected sensitivity.
3. Press the Test button.
4. Place finger on screen and move pointer to test.
5. Select the desired setting and press the Apply button.The Test button
must be pressed before the Apply button displays.