Operator’s manual, Speed, Product setup – Great Plains DICKEY-john AI-120 12-inch Virtual Terminal User Manual
Page 94
Advertising
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
86 / AUTO SECTION CONTROL SETUP
SPEED
Sends vehicle speed information to the ISOBUS implement for performing
rate control and other functions. This function is only visible if the active
implement is an ISOBUS implement. When enabled, the GPS speed can be
used in lieu of using a radar to detect speed.
Figure 121
GPS Speed Emulation Setup
PRODUCT SETUP
IMPORTANT: This feature is not applicable when using a DICKEY-john
WSMT-PDC IntelliAg systems and should not be used
for product setup. This function is setup and controlled
through the IntelliAg system.
Figure 122
Product Setup
Advertising