Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 133)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
AS APPLIED JOB SETUP / 125
FIND NEAREST FIELD
8. An easier way to recall a field is to drive to the location of that field and
then press the Find Nearest Field button ( Figure 181 ). The field
closest to the existing location is loaded and can be selected to display
on the main guidance screen.
CREATE BOUNDARY FROM A SHAPEFILE
A boundary can be imported from a shapefile via a USB. The file should
only contain a single shape or the boundary will be defined from the first
shape in the file which may not represent that boundary needed.
Import a Shapefile:
1. Load the shapefile to the USB.
2. Insert the USB into the virtual terminal.
3. Select the Field Menu button.
4. Press the Boundary from Shapefile button.
5. Select the USB icon. Data objects turn blue.
6. Select the USB home icon to view the root of the USB file structure.
Files and folders on the USB root display.
7. Select a folder to open.
8. Find the required file and select. The file displays in white and is now
enabled. Multiple files can be selected.
9. Press the Check button to import the shapefile boundary.
Figure 182
Import Boundary Shapefile