Operator’s manual, Access level, Software upgrade – Great Plains DICKEY-john AI-120 12-inch Virtual Terminal User Manual
Page 48
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
40 / TERMINAL SETUP
ACCESS LEVEL
Setting the access level is a restricted activity and Operator is the only
available option for all operators and owners. Other access levels are only
used by qualified technicians. DO NOT ATTEMPT TO CHANGE THE
ACCESS LEVEL.
Figure 60
Access Level
SOFTWARE UPGRADE
A software upgrade should not be necessary when receiving a new console
and is typically performed when a new upgrade is required.
PROVISION USB UPGRADE
1. On a Windows machine, unzip the installation ZIP file into the root
folder of a USB flash drive.
2. Safely eject the USB flash drive from the Windows machine.
3. Plug the USB flash drive into the console.
4. Press the Setup button.
5. Select User / Access Level / PROVISION USB FOR UPGRADE.
6. Select Yes.
Figure 61
Provision USB for Upgrade
7. The system requires a power down. Press the green power button on
terminal back.