Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 79)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
TERMINAL SETUP / 71
Figure 105
Firmware Update Setup Wizard
IMPORTANT: A firmware upload takes several minutes to complete.
Firmware is loading while an hourglass appears
onscreen. Do not interrupt this process by pressing
buttons or turning system off.
9. When the final Load Firmware screen indicates 100% completion, the
system must restart. Press the Check button to begin restart.
– An additional upload screen appears when loading firmware for the
Planter WSMT. Uploading firmware is complete when the progress
bar reaches 100%.
– Alarm screens may appear after a firmware upload and reboot.
Acknowledge alarm screens to proceed.
– A boom channel assignment is required if GPS is active.