Operator’s manual, Reload an exclusion zone, Create flag points – Great Plains DICKEY-john AI-120 12-inch Virtual Terminal User Manual
Page 135
Advertising
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
AS APPLIED JOB SETUP / 127
RELOAD AN EXCLUSION ZONE
1. Press the Field menu button
2. Select the Exclusion Map button to open menu.
3. Select the Exclusion Map file name.
4. Press the Check button to recall.
Figure 185
Recall an Exclusion Zone
CREATE FLAG POINTS
1. Drive to the desired location to mark with a flag point.
2. Select the Field menu button.
3. Press the Create Flag Point button.
4. Select a Flag Point preset from the menu or select Custom to create a
customized marker.
5. When the selected flag point is pressed, the flag point is set at the
current vehicle location.
Advertising