Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 139)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
AS APPLIED JOB SETUP / 131
CREATE AN AS APPLIED JOB
NOTE: As applied jobs generate a
shape file output. 1. Select the Job Menu button.
2. Press the Create New Job button.
3. At the Job Name window, a new job name must be selected.
– Select the auto-generated job name by pressing the Check button
or
– Select Job Name to enter a custom name using the keypad.
Figure 191
Create Job Name
4. After creating a job name, the master switch onscreen will change from
red to gray indicating the switch is accessible and a new job file is
created.
The following conditions are required before the master switch is
accessible:
– A job file loaded or created
– A valid GPS signal
– An implement and vehicle profile loaded or created
Figure 192
Master Switch