Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 65)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
TERMINAL SETUP / 57
FLAG POINT PRESETS
During operation, flag point presets are used to mark the GPS location of a
particular condition in the field. Presets include defined icons and a name
that can be changed to appropriately identify the condition.
To Mark a Flag Point Preset:
1. Press the System/Flag Points icons.
2. Select a Flag Point Preset and apply the desired icon and re-name, if
desired.
3. Press the Check button to confirm the selection.
Figure 87
Flag Point Presets
ISOBUS
The IsoBus menu allows setup and customization of the virtual terminal and
Main Operator screen.
• Assigning a UT# if multiple terminals are used
• Soft keys
• Working set key location
The virtual terminal Main screen can be customized by adjusting the size
and location of the soft keys. Not all of the selections offered are applicable
to the IntelliAg AI-120 terminal.
1. Press the System/ISOBUS/VT icons to display the Virtual Terminal
Setup menu.