Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 154)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
146 / VARIABLE RATE JOB SETUP
COPY A PRESCRIPTION
An existing prescription can be copied to a different line item by pressing
the Duplicate Process Data Variable button. Duplicating a task can
eliminate entry of similar data if multiple rate control channels and control
targets are used. After a similar task is copied, the control must be assigned
to the appropriate channel.
1. Press the Duplicate Process Data Variable button of the task data to
copy.
2. Select the Control Target and change to the desired channel of control.
Figure 211
TARGETS NOT CONFIGURED
A copied task requires the control target be assigned to a different channel.
– Change the Control Target channel per step 2 of ( Figure 211 )
CREATE A NEW PRESCRIPTION
The New Prescription button creates a new prescription by either setting
the fixed values or importing a shapefile to allow variable rate control. Once
the prescription is created, select the Default button in the Source column.
To Create a New Prescription:
1. Press the Create a New Prescription button and a new prescription
appears.
2. Press the Default button in the Source column.
3. Select the control target as a fixed value or load a shape file.
– Fixed value: set the fixed values and associates this prescription
with a product.
– Load shape file: Navigate to the shapefile to import from the USB
and select the attribute from the shapefile to be imported. When
importing a shapefile it is possible to set the fixed values, associate
the prescription with a product, and set a scaling factor that is
applied to the values in the shapefile when it is converted to the
task data format.
Duplicate Process Data
Variable Button