Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 30)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
22 / TERMINAL SETUP
DRY DENSITY
7. At the Regional Units menu, press the Dry Density button to select the
unit type for granular fertilizer, seeding, and anhydrous applications.
Select volume as pounds per gallon, cubic feet, or bushel. Press the
Check button to accept.
Figure 25
Dry Density
LIQUID PRODUCT UNITS
8. At the Regional Units menu, press the Liquid Products Units button
and select the liquid units as gallons, cubic feet, or pounds. Press the
Check button to accept.
Figure 26
Liquid Units
APPLICATION RATE PRODUCT TYPE
IMPORTANT: This feature is not applicable and should not be used to
enter application rates. This function is setup and
controlled through the IntelliAg system.
Figure 27
Application Rate Product Type