Connecting to a – Bio-Rad BioFrac™ Fraction Collector User Manual
Page 25
Advertising
Connecting Instruments and Devices to the BioFrac Fraction Collector
User Guide
| 17
of fraction collection. Devices not manufactured by Bio-Rad must be
capable of transistor to transistor logic (TTL) control.
Note:
Before proceeding, make sure power to each component to be
connected is turned off. Be sure to use a grounded, surge-protected outlet
when plugging in the power cables.
Connecting to a BioLogic DuoFlow Chromatography
System
Connect the BioFrac fraction collector to the BioLogic DuoFlow system using
system cables 17, 18, 19, or 21.
Fig. 7.
Connecting the fraction collector to a BioLogic DuoFlow chromatography
system.
Advertising