Bio-Rad BioFrac™ Fraction Collector - Manual (Page 72)

5 | Stand-Alone Operation
64 | BioFrac Fraction Collector
number and end tube number are automatically updated according to the
MultiRun mode selected.
6. Set the fraction size units (min, ml, or drops) and set the fraction size. If
collecting by volume, you must enter a flow rate.
7. Press Collect (F4) and turn Windows on.
8. Press Table (F3) and enter the windows and fraction size in the Collection
Windows Table screen. Note that the fraction size entered in the Main screen is
the default size. The fraction size can be changed for each window. When
finished, press Done. On the Main screen, Collect should now read Collect –>
Windows.
9. (Optional) press Collect (F4) and set the delay time (see Collect Using a Delay
Function on page 67 ).
10. (Optional) press Method (F3) and save your method.
11. Press Run (F1) to start the experiment.
Note: At any point during the run you can use the Run screen function
keys (see Table 8 on page 43 ).