Peak detection by threshold – Bio-Rad BioFrac™ Fraction Collector User Manual
Page 69
Peak Detection by Threshold
User Guide
| 61
Peak Detection by Threshold
Fig. 24.
Running a Collect by Threshold method.
To run a Collect by Threshold method
1.
To select a rack, press Rack (F2) and then choose a rack from the Rack menu.
Choose whether or not you want the diverter valve to divert to waste during
fraction advances. If you are collecting in microplates or Titertube tubes,
choose a collection pattern: Serpentine, Row, or Column.
Note:
Whenever a new rack is selected, the start tube and end tube values
are updated to reflect the maximum number of tubes available for the
selected rack.
2.
Choose the appropriate MultiRun mode for your experiment (see
for a description of the MultiRun function).
3.
Set the start tube and end tube rack position and tube number.