Example: collection using time windows and delay – Bio-Rad BioFrac™ Fraction Collector User Manual
Page 81
Advertising
Collect Using a Delay Function
User Guide
| 73
Example: Collection Using Time Windows and Delay
Case 1, where start time = 5 min and delay time = 0 min
Case 2, where start time = 5 min and delay time = 0.25 min
Assume the following:
Note that each time or volume window is separated by a tube containing the delay
volume. If delay time is zero, then tube #1 will be empty and subsequent time or
volume windows collected are separated by empty tubes.
Fig. 30.
Collection windows and a delay.
Flow rate
1 ml/min
Peak fraction size
1 min
Time window #1
Start 5, End 8
Time window #2
Start 10, End 12
Advertising