Figure, Can be used to, Lock pins (see – Bio-Rad BioFrac™ Fraction Collector User Manual
Page 40: Can be used to lock the drophead at the
Advertising
3
| System Configuration and Plumbing
32
| BioFrac Fraction Collector
To adjust the drophead height
1.
Disengage the lock by pulling both lock pins outward from the fraction collector.
The lock pins can be disabled by turning the handles sideways (
).
2.
Move the control module to the desired height (
).
3.
Move the control module up or down until the lock pins click into position.
Fig. 11.
Lock pin adjustment.
Advertising