Commands listed by function, Disk group commands – Dell PowerVault MD3000 User Manual
Page 108
108
Script Commands
following name is used in a command running under a Windows
operating system:
[\"Engineering"\]
For Linux, and when used in a script file, the name appears as the
following:
["Engineering"]
When you enter the World Wide Identifier (WWID) of an HBA host
port, some usages require quotation marks around the WWID. In
other uses, you must put angle brackets (< >) around the WWID.
The description of the WWID parameter tells you if you must put
quotation marks or angle brackets around the WWID.
•
Script commands must end with a semicolon (;). You can enter more than
one script command on the command line each time you enter a CLI
command.
Commands Listed by Function
This section presents the commands organized into groups related to
physical, logical, and operational features of the storage array.
Disk Group Commands
"Create Disk Group" on page 120
"Delete Disk Group" on page 139
"Revive Disk Group" on page 163
"Start Disk Group Blink" on page 223
"Start Disk Group Defragment" on page 223
"Stop Disk Group Blink" on page 229