Dell PowerVault MD3000 - Manual (Page 118)

118
Script Commands
Clear Physical Disk Channel Statistics
This command resets the statistics for all physical disk channels.
Syntax
clear allPhysicalDiskChannels stats
Parameters
None.
Clear Storage Array Configuration
This command clears the entire configuration from the RAID controller
modules in a storage array. Information that defines all disk groups, virtual
disks, and hot spares is deleted. Use this command to create a new
configuration on a storage array that already has a configuration defined.
NOTICE:
As soon as you run this command, the existing storage array becomes
unresponsive. You must remove and re-add the storage array to resume
communication with the host. To remove an unresponsive storage array, access the
Enterprise Management Window, and click Remove on the Modular Disk Storage
Manager toolbar. To re-add the storage array, access the Enterprise Management
Window, click New in the Modular Disk Storage Manager toolbar, and enter the
appropriate IP address.
priority Specifies the priority that the consistency
check has relative to host I/O activity.
Valid entries are highest, high, medium,
low, or lowest.
verbose Captures progress details, such as percent
complete, and shows the information
while virtual disk consistency is being
repaired. To capture progress details, set
this parameter to TRUE. To prevent
capturing progress details, set this
parameter to FALSE.
Parameter Description