Dell PowerVault MD3000 - Manual (Page 169)

Script Commands
169
Example
-c "save storageArray iscsiStatistics [raw] file =
\"testfile\";"
Save Storage Array Performance Statistics
This command saves the performance statistics to a file. Before you use this
command, issue the set session performanceMonitorInterval and set session
performanceMonitorIterations commands to specify how often statistics are
collected.
Syntax
save storageArray performanceStats file=" filename "
Parameters
Save Storage Array SAS PHY Counts
This command saves the storage array SAS PHY counters to a file.
Syntax
save storageArray SASPHYCounts file=" filename "
Parameters
Parameter Description
file Name of the file to which to save the performance
statistics. You must put quotation marks (" ") around
the file name.
Parameter Description
file Name of the file to which to save the storage array SAS
PHY counters. You must put quotation marks (" ")
around the file name.