Dell PowerVault MD3000 - Manual (Page 185)

Script Commands
185
Syntax Element Statement Data
The following options are available for the ethernetPort parameter.
enableIPv4=(TRUE | FALSE) |
enableIPv6=(TRUE | FALSE) |
ethernetPort Options
IPv6LocalAddress=(0-FFFF):(0-FFFF):(0-FFFF):(0-
FFFF):(0-
FFFF):(0-FFFF):(0-FFFF):(0-FFFF) |
IPv6RoutableAddress=(0-FFFF):(0-FFFF):(0-
FFFF):(0-FFFF):(0-
FFFF):(0-FFFF):(0-FFFF):(0-FFFF) |
IPv6RouterAddress=(0-FFFF):(0-FFFF):(0-FFFF):(0-
FFFF):(0-
FFFF):(0-FFFF):(0-FFFF):(0-FFFF) |
IPv4Address=(0-255).(0-255).(0-255).(0-255) |
IPv4ConfigurationMethod=[(static | dhcp)] |
iscsiHostPort The values that support this parameter are listed in
"Syntax Element Statement Data" on page 185. Many
settings are possible, including setting the IP address,
the gateway address, the subnet mask address, the IPv4
priority, and the IPv6 priority.
rloginEnabled The setting for whether the remote login feature is
turned on or turned off. To turn on the remote login
feature, set this parameter to TRUE. To turn off the
remote login feature, set this parameter to FALSE.
serviceAllowedIndicator The setting for whether the Service Action Allowed
indicator light is turned on or turned off. To turn on the
Service Action Allowed indicator light, set this
parameter to on. To turn off the Service Action Allowed
indicator light, set this parameter to off.
Parameter Description