Dell PowerVault MD3000 - Manual (Page 217)

Script Commands
217
Parameters
None.
Example
-c "show storageArray
unconfiguredIscsiInitiators;"
Show Virtual Disk
For the virtual disks in a storage array, this command returns the following
information:
• Number of virtual disks
• Name
• Status
• Capacity
• RAID level
• Disk group where the virtual disk is located
• Details
– Virtual disk ID
– Subsystem ID
– Physical disk type (SAS or SATA)
– Enclosure loss protection
– Preferred owner
– Current owner
– Segment size
– Modification priority
– Read cache status (enabled, disabled)
– Write cache status (enabled, disabled)
– Write cache without batteries status (enabled, disabled)
– Flush write cache after time
– Enable background media scan status (enabled, disabled)
– Media scan with consistency check status (enabled, disabled)